1- Give Power Supply to the Modem by which the circuit also gets the power supply.
2- Wait for the modem to be configured.
3- If everything is ok it will sent you a message “GSM CONTROLLED DEVICE IS ACTIVATED”.
4- Now three features are provided to this project i.e. COLLISION DETECTION, GATE ALERT AND FACILITY TO START STOP YOUR MOTOR WHICH IS FOR SIMULATION OF IGNITION SYSTEM OF YOUR CAR.
5- When you will open the wire on pcb it will alert you by message “SOMEONE TRY TO OPEN YOUR DOOR”.
6- When you will push the button it will alert you by message“COLLISION DETECTED, HELP REQUIRED”.
7- To start your motor send message to the no you provided to the modem “35791 ONV” it will start the motor and will send you an acknowledgement “VEHICLE IS STARTED”.
8- To stop your motor send message to the no you provided to the modem “35791 OFFV” it will start the motor and will send you an acknowledgement “VEHICLE IS STOPPED”.
9- After completion of project disconnect the power supply.
Fueled by the passion and expertise of our dedicated associates, Zeegra enables our clients and organizations with simplified and optimized solutions. With our collaborative solutions strategy to produce affordable quality solutions and rapid results.
Zeegra Technologies
#57, 1st Main Road
J.P.Nagar IIIrd Phase
Bengaluru 560 078, INDIA
+91 80 26686914
+91 484 4148165
info@zeegra.com